Insights · Buyer's guide · 19 November 2026
Rare earth oxides for magnet makers: dysprosium, terbium and NdPr explained for buyers
A plain-English buyer's guide to the three rare earth oxides behind neodymium magnets: what NdPr oxide, dysprosium oxide and terbium oxide do, how purity is specified as a share of total rare earth oxide, how they are packed, and what lead times to expect.
Every electric-vehicle motor, wind-turbine generator and hard-disk drive depends on neodymium-iron-boron magnets, and every one of those magnets starts life as a few kilograms of rare earth oxide. Three oxides do most of the work: neodymium-praseodymium oxide for the magnetic strength, and dysprosium oxide and terbium oxide for keeping that strength at high temperature. Buyers outside the rare earth industry often find the specifications confusing because purity is written as a ratio rather than a percentage of the whole. This guide explains the three products, how to read a certificate, and how an order moves from the separation plant to your door.
What does NdPr oxide do in a magnet?
Neodymium and praseodymium sit next to each other in the periodic table and occur together in every rare earth ore. Separating them completely is expensive and, for magnets, unnecessary, so the industry trades a combined neodymium-praseodymium oxide, usually with praseodymium making up around a fifth to a quarter of the rare earth content. The oxide is reduced to NdPr metal by molten-salt electrolysis, alloyed with iron and boron, and then milled, pressed and sintered into magnets. If you are buying oxide you are therefore normally a metal or alloy producer, a research group or a trader supplying one, rather than the magnet factory itself.
A magnet-grade NdPr oxide certificate shows total rare earth oxide, written TREO, at 99% or better, then the share of that TREO that is neodymium plus praseodymium oxide, also 99% or better, and then the individual limits for the other rare earths and for non-rare-earth impurities such as iron, calcium, silicon and chloride. The praseodymium ratio is stated separately. Always read the second figure: a product can be 99% TREO and still contain lanthanum or cerium that will dilute the magnet.
Why add dysprosium and terbium at all?
A plain NdFeB magnet loses its magnetism as it gets hot, and a traction motor runs hot. Adding a few per cent of dysprosium or terbium raises the temperature at which the magnet keeps its field, a property the industry calls coercivity. Dysprosium oxide 99.5% is the workhorse; terbium oxide 99.99% is more effective weight for weight and is used where the design budget allows it or where the grain-boundary diffusion process is used to place the heavy rare earth only on the magnet surface. Both are scarce. Dysprosium and terbium make up a tiny fraction of most rare earth ores, which is why they cost many times more than NdPr and why buyers watch their availability closely.
How to read the purity on a certificate
For dysprosium oxide the figure that matters is Dy2O3 as a share of TREO, typically 99.5% minimum with the balance made up mainly of neighbouring elements such as terbium, holmium and yttrium. For terbium oxide the formula on the certificate is Tb4O7, and magnet buyers ask for 99.99% of TREO. For all three oxides also check loss on ignition, which should be around 1% or less, particle size if your reduction process is sensitive to it, and the chloride and iron limits. Ask for the certificate of the specific lot with the quotation, not a typical analysis, because rare earth separation plants blend batches and the actual figures move within the specification.
Packaging, storage and transport
Rare earth oxides are fine powders, pale in colour for NdPr, white for dysprosium and dark brown for terbium. They are packed in sealed polyethylene bags of 1 kg to 25 kg inside drums, and the drums are palletised for sea freight or boxed for air. None of the three is classed as dangerous goods for transport, so a forwarder handles them as ordinary cargo. Keep the drums closed and dry: the oxides absorb moisture and carbon dioxide slowly from the air, which shows up as a higher loss on ignition if a drum has been left open.
Quantities follow the price class. NdPr oxide moves in 500 kg and multi-ton lots. Dysprosium oxide is bought in 25 kg to 500 kg lots. Terbium oxide, the dearest of the three, is ordered in single kilograms to a few hundred kilograms. All three are quoted on request against the current separated-oxide market; the figures on the product pages are indicative and are refreshed monthly.
What lead time should I plan for?
The heavy rare earths, dysprosium and terbium included, are controlled materials on the Chinese side, and allocations from the separation plants are made in advance. Plan on four to eight weeks from a confirmed order to departure for dysprosium and terbium oxide, and two to four weeks for NdPr oxide, then add the freight time to your port. Air freight is realistic for terbium and small dysprosium lots; NdPr nearly always goes by sea. A repeat buyer with an established file moves faster than a first-time buyer, so it pays to place a small qualifying order early.
Documents with every shipment
Each lot ships with a certificate of analysis showing TREO and the individual rare earth ratios, a safety data sheet, a packing list and a commercial invoice, with a certificate of origin on request. Rare earth oxides fall under HS 2846, and most importing countries require no special permit, but tell us the exact customs classification your broker uses so the paperwork matches.
Buying rare earth oxides into the USA
Demand in the United States is driven by the new magnet and motor plants being built to shorten the supply chain, together with universities and national laboratories qualifying alternative materials. Shipments arrive by air into Chicago, Los Angeles or New York for small lots, and by sea into Los Angeles, Long Beach or Houston for NdPr tonnage. Our USA market guide covers the documents, typical transit times and the special-sourcing products most often ordered together. For rare earths the practical advice is to specify the TREO ratio you need, ask for the lot certificate before you commit, and order the heavy rare earths well ahead of your production schedule.
Summary for buyers
Buy NdPr oxide for the magnetic strength and dysprosium or terbium oxide for high-temperature performance. Read purity as a share of total rare earth oxide, not as a share of the powder. Keep drums sealed and dry. Allow four to eight weeks before departure for the heavy rare earths. Send us the oxide, the ratio, the quantity and the destination, and we will quote within one working day with the lot certificate attached.
Ready to buy?
Send the product, grade, quantity and destination port and we quote within one working day, with the certificate of analysis and safety data sheet attached.